Epson Home Cinema 2350 Manuel - Sayfa 3

Projektör Epson Home Cinema 2350 için çevrimiçi göz atın veya pdf Manuel indirin. Epson Home Cinema 2350 4 sayfaları.

Sayfayı Yazdır

Notices

Wireless product safety instructions

Streaming Media Player model: STI6110B

Remote controller model: WH-55, WH-5674

This document provides safety instructions and describes the specifications. Read this

document carefully before use to ensure your safety and product performance.

This device is restricted to indoor operations only.

Data transmission is always initiated by software, which is the passed down through

the MAC, through the digital and analog baseband, and finally to the RF chip. Several

special packets are initiated by the MAC. These are the only ways the digital baseband

portion will turn on the RF transmitter, which it then turns off at the end of the packet.

Therefore, the transmitter will be on only while one of the aforementioned packets is

being transmitted. In other words, this device automatically discontinue transmission in

case of either absence of information to transmit or operational failure.

U.S. FCC Notices

FCC ID: BKMAE-STI6110B

FCC ID: BKMAE-WH55

FCC ID: BKMAE-WH5674

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment. Properly shielded

and grounded cables and connectors must be used for connection to host computers

and/or peripherals in order to meet FCC emission limits.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency (RF) Exposure Guidelines. This

equipment should be installed and operated with a distance of at least 7.9 inches (20 cm)

between the radiator and your body (except for the Bluetooth remote controller model

WH-55 or WH-5674).

Industry Canada (IC) Notices

IC: 1052D-STI6110B

IC: 1052D-WH55

IC: 1052D-WH5674

CAN ICES-3 (B)/NMB-3 (B)

This device complies with Industry Canada's license-exempt RSSs. Operation is subject

to the following two conditions: (1) This device may not cause interference; and (2) this

device must accept any interference, including interference that may cause undesired

operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment should be installed and operated with a distance of at least 7.9 inches (20 cm)

between the radiator and your body (except for the Bluetooth remote controller model

WH-55 or WH-5674).

Supplier's Declaration of Conformity

According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or

CPU Boards and Power Supplies used with Class B Personal Computers:

We:

Epson America, Inc.

Located at:

3131 Katella Ave., Los Alamitos, CA 90720

Telephone:

(562) 981-3840

Declare under sole responsibility that the product identified herein, complies with

47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,

is identical to the representative unit tested and found to be compliant with the

standards. Records maintained continue to reflect the equipment being produced can

be expected to be within the variation accepted, due to quantity production and testing

on a statistical basis as required by 47CFR § 2.906. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Trade Name:

Epson

Type of Product:

LCD Projector

Model:

HA73A

Marketing Name:

Home Cinema 2350

Options:

Remote controller 2219079 xx (x=0-9)

Epson America, Inc. Limited Warranty

Two-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty

A. What Is Covered: Epson America, Inc. ("Epson") warrants to the purchaser of the

Epson product enclosed with this limited warranty statement that the product, if

purchased new and operated in the United States, Canada, or Puerto Rico, will be

free from defects in workmanship and materials for a period of two (2) years from

the date of original purchase. This limited warranty applies only to the projector and

not to the projector lamp, which carries a limited warranty period of 90 days from the

date of original purchase. For warranty service, you may be required to provide proof

of the date of original purchase.

B. What Epson Will Do To Correct Problems: If your product requires service during the

limited warranty period, please call Epson at the number at the end of this statement

and be prepared to provide the model, serial number, and date of original purchase.

This line will be answered during Epson's regular support hours (currently 7:00

to 4:00

, Pacific Time, Monday through Friday—subject to change without notice).

If Epson confirms warranty service is required, Epson will, at its option, repair or

replace the defective unit without charge for parts or labor. If Epson authorizes

an exchange for the defective unit, Epson will ship a replacement product to you,

freight prepaid, as long as you use an address in the United States, Canada, or Puerto

Rico. The replacement product may be new or refurbished to the Epson standard of

quality. (The replacement product may not include promotional materials, accessories,

documentation, manuals, software, or cables.) You are responsible for securely

packing the defective unit and returning it to Epson within five (5) working days of

receipt of the replacement. Epson requires a debit or credit card number to secure

the cost of the replacement product in the event that you fail to return the defective

one. If Epson authorizes repair instead of exchange, Epson will direct you to send

your product to Epson or its authorized service center, where the product will be

repaired and sent back to you. You are responsible for packing the product and for

all postage and shipping costs to and from the Epson authorized service center. When

warranty service involves the exchange of the product or of a part, the item replaced

becomes Epson property. If service cannot be provided on the product for any reason

during the term of this agreement and Epson no longer sells the same model, Epson

will replace the product with a model of equal or superior value. Epson's liability for

replacement of the covered product will not exceed the original retail selling price of

the covered product. Replacement products or parts assume the remaining warranty

period of the product covered by this limited warranty. If Epson replaces the lamp as

part of the warranty service, the replacement lamp carries the limited 90-day warranty

stated above.

C. What This Warranty Does Not Cover

1. Any damage caused by misuse, abuse, improper installation, or neglect; disasters

such as fire, flood, or lightning; or improper electrical currents, software, or

interaction with non-Epson products.

2. Any damage caused by or any service for third-party software, applications, parts,

components, or peripheral devices added to the product after its shipment from

Epson, such as dealer- or user-added boards, components, or cables.

3. Any damage caused by installing the product next to a heat source or directly in

the path of an air vent or an air conditioner.

4. Damage due to excessive, continual usage.

5. Damage caused by failure to properly maintain the product (see your User's Guide

for details).

6. Service when the product is used outside the U.S., Canada, or Puerto Rico.

7. Service if the product label, logo, rating label, or serial number has been removed.

8. Consumables such as filters or any items that are identified as being replaceable

by the user in the product documentation (see your User's Guide for details).

9. Loss of data.

10. Installation or removal.

11. Any damage from service performed by anyone other than an Epson-authorized

servicer.

12. Damage resulting from operation or storage in areas with smoke, oil, high

humidity, steam, corrosive gases or chemicals, excessive dust, vibration, or shock.

13. Cosmetic damage caused by handling or normal wear and tear during use.

14. Any product or parts purchased as used, refurbished, or reconditioned.

15. Any damage caused by using improper packaging materials or improper packing

and shipping when returning a product for repair or replacement. You will be

invoiced for such shipping damage to the product.

This warranty is not transferable. Epson is not responsible for your data or

applications, which cannot be restored and should be backed up by you. Postage,

insurance, or shipping costs incurred in presenting your Epson product for carry-in

warranty service are your responsibility. If a claimed defect cannot be identified or

reproduced in service, you will be held responsible for costs incurred.

D. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND

CLASS ARBITRATIONS

1. Disputes: The terms of this Section D shall apply to all Disputes between you and

Epson. The term "Dispute" is meant to have the broadest meaning permissible

under law or in equity and includes any dispute, claim, controversy, or action

between you and Epson arising out of or relating to this Agreement (including

its formation, performance, or breach), the Software, Epson Hardware, the

parties' relationship with each other, and/or any other transaction involving you

and Epson, whether in contract, or with respect to warranty, misrepresentation,

fraud, tort, intentional tort, statute, regulation, ordinance, or any other legal or

equitable basis. However, a "Dispute" does not include a claim or cause of action

for (a) trademark infringement or dilution, (b) patent infringement, (c) copyright

infringement or misuse, or (d) trade secret misappropriation (an "IP Claim"). You

and Epson also agree, notwithstanding Section D, that a court, not an arbitrator,

may decide if a claim or cause of action is for an IP Claim.