C.T.M. HS-360 Talimat Kitapçığı - Sayfa 13
Scooter C.T.M. HS-360 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. C.T.M. HS-360 17 sayfaları. 3-series mobility scooter
Sayfayı Yazdır
- 1. Table of Contents
- 2. Introduction
- 3. Important Precautions
- 4. Electromagnetic Interference and Warnings
- 5. Identification of Parts
- 6. Operating Your Scooter
- 7. Disassembling Your Scooter
- 8. Assembling Your Scooter
- 9. Charging the Batteries
- 10. Care and Maintenance
- 11. Troubleshooting
- 12. Technical Specifications
3-Series
ASSEMBLING YOUR SCOOTER
To assemble the scooter, you can repeat the disassembly directions in reverse.
Abbreviated directions are given below. Refer to the Figures on pages 9-10 locate
the parts.
1.Use the tiller angle adjustment to move the steering column up out of the way.
2.Place the front basket.
3.Place batteries, use Velcro to fix the position and attach the battery power plugs.
4.Place rear hood.
5.Loose Seat Rotation Lever counterclockwise. Place gaiter and seat on seat post.
Tighten lever again by turning clockwise. Lock Seat Rotation Lever on bottom of seat
before sitting down.
11
Instruction Booklet