ABB +Q957 Kullanıcı Kılavuzu - Sayfa 11

DC Sürücüler ABB +Q957 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ABB +Q957 20 sayfaları. For acs880-07/07lc/17/17lc/37/37lc drives, prevention of unexpected start-up

Sayfayı Yazdır

Introduction to the manual 11

Introduction to the manual

Contents of this chapter

This chapter describes the manual in short and gives some general information for the

reader. This chapter also contains a quick reference guide for implementing a safety system.

Applicability

This manual is applicable to ACS880-07/07LC/17/17LC/37/37LC drives which have the

option: Prevention of unexpected start-up (option +Q957).

This manual shows the default design of the safety circuit ordered with option code +Q957.

The actual design can be different from the default design because of customer-defined

modifications. Always refer to the documentation delivered with the drive.

Target audience

This manual is intended for people who install, commission, use and service the safety

function. Read the manual before working on the unit. You are expected to know the

fundamentals of electricity, wiring, electrical components, electrical schematic symbols, and

functional safety.

Exclusion of liability

ABB is not responsible for the implementation, verification and validation of the overall safety

system. It is the responsibility of the system integrator (or other party) who is responsible

for the overall system and system safety.

The system integrator (or other responsible party) must make sure that the entire

implementation complies with the instructions in this manual, all relevant standards, directives

and local electrical code, and that the system is tested, verified and validated correctly.