C.T.M. HS-2750 Kullanıcı Kılavuzu - Sayfa 17

Tekerlekli Sandalye C.T.M. HS-2750 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. C.T.M. HS-2750 20 sayfaları.

Sayfayı Yazdır

HS-2750

7.MAINTENANCE AND CLEANING

7-1 REGULAR MAINTENANCE AND CLEANING

The power chair needs some basic attention to ensure it provides reliable service.

We recommend that the user ensures that the power chair is checked regularly for

maintenance requirements and receives a thorough, annual maintenance check up.

Annual Maintenance

We recommend that the chair has at least one full service per year from an authorized

dealer. This will ensure that your power chair is functioning properly and also helps

prevent future complications. This should include :

•Armrest/handle bar: Only use damp cloth with gentle detergent or 75% alcohol to wipe

the surface. Do not use abrasive cleaners.

•Seat Upholste/ backrest: Use vacuum cleaner or damp cloth with gentle detergent to

wipe the seat. Do not use abrasive cleaners as this will damage the seat. Do not sit

until the seat dries out.

•Remote module/Metal parts: Only use damp cloth to wipe and use dry cloth to dry out

immediately. Do not use abrasive cleaners as this will damage the parts. When power

chair dries out, the shroud can be applied with a light of wax to keep its gloss.

•Joints of parts (like font wheel fork, axle): Apply a little grease when the part is making

a grinding noise.

Regular Maintenance and Cleaning

01.Please turn off the power chair and make sure the lever is in Drive position before inspection

or maintenance to avoid roll-away.

02.User should inspect the power chair more often especially when the power chair has

possibly been riding on the bad road condition such as, grass, sand, bumps, and potholes.

03.Clean the dusts by old toothbrush before applying grease.

04.Avoid knocking or bumping the controller, especially the joystick.

05.Avoid prolonged exposure of your power chair to extreme conditions, such as heat, cold,

or moisture.

06.Keep the controller clean.

07.Check that all controller connectors are tight and secured properly.

08.Never hose off your power chair or place it in direct contact with water.

09.Keep the upholstery and frame clean by wiping with a soft cloth, particularly after driving

through wet, sandy or muddy conditions. Do not use harsh abrasive materials when

cleaning. Do not apply liquid cleaners or solvents directly to the control box, battery

charger or any electrical connections.

10.Keep wheels free from lint, hair, sand and carpet fibres.

11.Lightly oil axle pin, wheel axles and bearings once every three months, if necessary.

12.Inspect the tires. Tread depth should not be allowed to drop below 1mm.

13.Use only recommended batteries and have batteries changed by Qualified Dealer if you

have doubts about your ability to lift the components.

14.Charge batteries regularly. Make sure the charger lead plugs are engaged properly

in the sockets. Do not disconnect by pulling the cord.

15.With the controller turned off, check the joystick. Make sure it is not bent or damaged

and that it returns to the center when you release it. Check the rubber boot around the

base of the joystick for damage. Visually inspect the boot. Do not handle or try to repair

it. See your authorized dealer for any questions.

16.Visually inspect the controller harnesses. Make sure that they are not frayed, cut or

have any wires exposed. See your authorized dealer if there is a problem with any of

these harnesses.

17.Make sure all components of the control system are securely fastened to your power

chiair and don't over-lock any connector screws to prevent them from loosening.

User Manual