Cisco NCS 4200 Series Yapılandırma Kılavuzu - Sayfa 35
Ağ Yönlendiricisi Cisco NCS 4200 Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco NCS 4200 Series 36 sayfaları. 1 port oc-48/ 4 port oc-12/oc-3 + 12 port t1/e1 + 4 port t3/e3 cem interface module configuration guide, cisco ios xe fuji 16.7.x (cisco ncs 4200 series)
Ayrıca Cisco NCS 4200 Series için: Yapılandırma Kılavuzları (30 sayfalar)
Sayfayı Yazdır
Configuring SDH
controller sdh 0/0/16
rate STM1
no ais-shut
alarm-report all
clock source internal
overhead s1s0 0
aug mapping au-4
au-4 1
clock source internal
mode tug-3
tug-3 1
mode e3
overhead c2 0
cem-group 1 unframed
e3 clock source recovered 1
DCR Global Configuration
enable
configure terminal
recovered-clock 0 4
clock recovered 1 differential cem 0 1
end
Verifying DCR Configuration
Use show recovered clock command to verify E1 DCR configuration:
#show recovered clockRecovered clock status for subslot 0/16
----------------------------------------
Clock
1
(Port/au-4/tug3/tug2/e1)
Use show recovered clock command to verify T3 DCR configuration:
#show recovered clock
Recovered clock status for subslot 0/16
----------------------------------------
Clock
1
(Port/au-4/tug3)
Associated Commands
The following commands are used to configure SDH:
Commands
aug mapping
aug mapping [au-3 | au-4] stm [stm number] stm1
number [number]
aug mapping au-3 stm 1-16 path number 1-16
Type
Mode
STMx-E1
DIFFERENTIAL
Type
Mode
CEM
STMx-E3
DIFFERENTIAL
1 port OC-48/ 4 port OC-12/OC-3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco
CEM
Status
Frequency Offset(ppb)
1
ACQUIRED
n/a
Status
Frequency Offset(ppb)
1
ACQUIRED
n/a
URL
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-a1.html#wp4691616330
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-a1.html#wp4691616330
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-a1.html#wp4691616330
IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
Verifying DCR Configuration
Circuit-No
0/1/1/1/1
Circuit-No
0/1/1
35