Ace AFM-5 Kullanım Kılavuzu - Sayfa 11

Test Ekipmanları Ace AFM-5 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ace AFM-5 18 sayfaları. Breathalyzer

Sayfayı Yazdır

warm-up. When warming up gage reaches 95, take a deep

breath and get ready for blowing.

Step 6.

When "Start blowing" is displayed, blow for 5 seconds

into the mouthpiece until the gage

reaches 100 or you feel the air has been pulled through the air

pump in the ACE Instruments AFM-5 with a click.

NOTE:

If the camera feature is enabled, the camera will automa-

tically capture the image of a user once the blowing has been

completed.

Step 7.

If a sufficient breath sample is taken correctly, the

"Analyzing data" will be shown on the app.

sample is taken, an error message will displayed. To test again,

NOTE:

press "OK" on the app.

performed without app will be shown as "D".

Step 8.

After a few seconds the estimated blood alcohol con-

centration will be displayed on the app in per mill (3 digits, 2 de-

cimals/per mill = default setting). The result may vary depending

on the concentration which has been measured during the last

test. In this page, the app enables you to make a memo which is

viewable with test results from the Graph icon and the test results

can be also shareable via Text message, Facebook, or Twitter.

Step 9.

Tap either "Retest" or "BAC level" on the app (or press

Power button on the ACE Instruments AFM-5) to test again

without selecting a user. If you want to start test again from the

beginning, tap the Home Icon at the bottom menu.

Step 10.

Press and hold Power button on the ACE Instruments

AFM-5 for 2 seconds to turn it off when you have finished testing.

NOTE:

The device will turn off automatically if the device is not in

use for 2 minutes. If you exit the app while the device is working

with the app, all Blue, Red and Green LEDs on the device will

flicker together. Press Power Button on the device to restart.

Operation without App (Standalone mode):

NOTE:

To activate Standalone mode, you have to pair the ACE

Instruments AFM-5 with the app and set "Limit Line" first. (Pair

with the app and go to the setting on the app to set "Limit Line".)

NOTE:

If insufficient

In the graph, the test results

Once "Limit Line" is set, the set value will be sent to the ACE

Instruments AFM-5, and the test result on Standalone mode will

be displayed with indications of Red or Green LEDs according

to the set value of "Limit Line". (After setting the value of "Limit

Line", you should move into Home by tapping the Home Icon at

the bottom menu on the app in order to save and transfer the set

value to the ACE Instruments AFM-5.)

NOTE:

If the battery is low or the device is in unacceptable tem-

perature range, all Blue, Red and Green LEDs will flicker together.

Replace a new battery or try again after the device has reached a

temperature within the operating range (5-40 °C).

Step 1.

To turn on the ACE Instruments AFM-5, press and hold

Power button for a second until the Blue, Green and Red LEDS

appear on the device.

Step 2.

If the app on your smartphone is off and there is no pai-

ring signal from the app, the device will move into the Standalone

Mode and starts the warm-up automatically. A Blue LED keeps

blinking until the warm-up process is completed.

device doesn't have the set value of "Limit line", all Blue, Red

and Green LEDs will flicker together after the warm-up process.

Pair the device with the app and set "Limit Line" on the setting

menu of the app. If you turn on the app on you smartphone while

using the device in the Standalone Mode, the device will move

into the App Mode and start pairing automatically. (If you turn

on the app while the device is under the blowing or analyzing

process in the Standalone Mode, the device will move into the

App Mode after completing these processes.)

Step 3.

When the Blue LED stops blinking and remains on, it me-

ans the device is ready for blowing. Take a deep breath and blow

for 5 seconds into the mouthpiece until the Blue LED disappears.

Step 4.

If a sufficient breath sample is taken correctly, Green and

Red LEDs will blink in turns and the test result will be displayed

NOTE:

in a few seconds.

If an insufficient breath sample is taken,

blue, red and green LEDs will flicker together. Press Power button

to retest.

Step 5.

Test results will be displayed with indications of Red or

Green LEDs according to the set value of "Limit Line" as follows.

Press Power Button to retest.

NOTE:

If the