Cisco NCS 6008 Ambalajdan Çıkarma, Taşıma ve Emniyete Alma Kılavuzu - Sayfa 20
Ağ Yönlendiricisi Cisco NCS 6008 için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma, Taşıma ve Emniyete Alma Kılavuzu indirin. Cisco NCS 6008 44 sayfaları. 6000 series network convergence system routers unpacking, moving, and securing guide
Ayrıca Cisco NCS 6008 için: Manuel (12 sayfalar)
Sayfayı Yazdır
Dolly Specifications
Figure 1-7
Swing the lift arm swing bracket to the side (180-degree position as shown in
Step 6
holding bolts and partially tighten the bolts.
Repeat Step 1 through Step 6 for the other dolly unit.
Step 7
configuration.
Step 8
Lock the dolly caster brakes and anti-rotation pins until you are ready to move the chassis.
Step 9
Using the 3/8-inch ratchet wrench with 12-mm hex bit, firmly tighten the holding bolts on both dolly
units.
Note
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
1-12
Chassis Dolly—Removing Holding Bolts and Swinging Arm Out to 180-Degrees
To change the configuration back to the 90-degree configuration, repeat these steps and swing
the arm into the 90-degree position.
Figure
Figure 1-6
shows the dolly in a 180-degree
Chapter 1
1-7). Reinsert the
OL-29233-01