Cisco Profile Series Hızlı Başlangıç Kılavuzu

Ağ Yönlendiricisi Cisco Profile Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco Profile Series 4 sayfaları. Jbod on the 12g sas modular raid controller
Ayrıca Cisco Profile Series için: Başlangıç Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Kullanıcı Kılavuzu (7 sayfalar), Başlangıç Kılavuzu (35 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kurulum Kılavuzu (44 sayfalar), Yapılandırma Kılavuzu (13 sayfalar), Kurulum Sayfası (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Kurulum Kılavuzu (16 sayfalar), Başlangıç Kılavuzu (32 sayfalar), Manuel (16 sayfalar), Başlangıç Kılavuzu (42 sayfalar), Başlangıç Kılavuzu (46 sayfalar)

Cisco Profile Series Hızlı Başlangıç Kılavuzu
Contents
Introduction
Potentially Impacted Systems (~11000 servers):
Customer Visibility/Impact:
Work-Around Options:
Introduction
The intent of this document is to address the manufacturing issue related to the Peripheral
Component Interconnect Express (PCIe) Option ROM settings as seen on some Cisco C220 M4
and C240 M4 servers. A number of the C-Series servers have shipped to customers with the
incorrect PCIe Option ROM settings, preventing them from booting to many PCIe based devices
(Including but not limited to RAID Controller / Serial-Attached SCSI (SAS) Host Bus Adapter
(HBA), Modular LAN on Motherboard (MLOM) or other networking cards or HBAs. The instructions
below will assist you in resolveing customers impacted by this.
Potentially Impacted Systems (~11000 servers):
C220 M4: Systems shipped between Feb 14th and Mar 28th
C240 M4: Systems shipped between Feb 14th and Mar 28th
Customer Visibility/Impact:
Customers are unable to boot from any PCIe Slot based device, as the "All PCIe Slots
OptionROM" flag has been disabled. Customers will need to toggle this BIOS token, and can do
so using any of the workaround methods mentioned below.
Work-Around Options:
Work-Around #1 (Recommended):
Log in to the IMC, and navigate to the Summary / BIOS / Configure BIOS / Advanced Tab as
shown below.