Cisco SFE2010 Veri Sayfası - Sayfa 2
Ağ Yönlendiricisi Cisco SFE2010 için çevrimiçi göz atın veya pdf Veri Sayfası indirin. Cisco SFE2010 5 sayfaları. Sfe/sge managed switches
Ayrıca Cisco SFE2010 için: Ürün Yazılımı Yükseltme Kılavuzu (5 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Features
Forty-eight 10/100 Ethernet ports
●
Two 10/100/1000 Ethernet ports (used as stacking ports if operated in stacking mode)
●
Two mini Gigabit Interface Converter (mini-GBIC) slots for fiber Gigabit Ethernet expansion
●
Dual images for resilient firmware upgrades
●
17.6-Gbps, nonblocking, store-and-forward switching capacity
●
Simplified QoS management enabled by queuing techniques using 802.1p, differentiated
●
services (DiffServ), or type of service (ToS) traffic prioritization
Power redundancy when used with the Cisco RPS1000 380W Redundant Power Supply
●
Unit
Fully resilient stacking for optimized growth with simplified management
●
ACLs for granular security and QoS implementation
●
Configuration and monitoring from a standard web browser
●
Secure remote management of the switch via Secure Shell (SSH) and SSL encryption
●
802.1Q-based VLANs enable segmentation of networks for improved performance and
●
security
Private VLAN Edge (PVE) simplifies network isolation of guest connections or autonomous
●
networks
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SFE2010 48-Port 10/100 Ethernet Switch.
Table 1.
Specifications for the Cisco SFE2010 48-Port 10/100 Ethernet Switch
Specifications
Ports
Buttons
Cabling type
LEDs
Performance
Switching capacity
Forwarding capacity
Stacking
Stack operation
Layer 2
MAC table size
Number of VLANs
VLAN
48 RJ-45 connectors for 10BASE-T/100BASE-TX; two 10BASE-T/100BASE-
TX/1000BASE-T ports; 2 mini-GBIC ports; console port; auto medium dependent interface
(MDI) and MDI crossover (MDI-X); auto negotiate/manual setting; RPS port for connecting
to redundant power supply unit
Reset button
Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP
Category 5 Ethernet or better for 1000BASE-T
PWR, Fan, Link/Act, Speed, RPS, Master, Stack ID 1 through 8
17.6 Gbps nonblocking
13 mpps (64-byte packets)
● Up to 192 ports in a stack
● Hot insertion and removal
● Ring and chain stacking options
● Master and backup master for resilient stack control
● Auto-numbering or manual configuration of units in stack
8000
256 active VLANs (4096 range)
Port-based and 802.1Q tag-based VLANs; protocol-based VLAN; management VLAN;
multicast TV VLAN; PVE; Generic VLAN Registration Protocol (GVRP)
Data Sheet
Page 2 of 5