CAB MAESTRO 3E/600 Operatör El Kitabı - Sayfa 12

Su Filtrasyon Sistemleri CAB MAESTRO 3E/600 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. CAB MAESTRO 3E/600 14 sayfaları. Pcb separator

Sayfayı Yazdır

Blade Replacement

5.1

Replacement Blades

Part No. Description

8933945 MAESTRO 3E/450

8935000 MAESTRO 3E/600

Table 4

Replacement Blades

5.2

Replacement of the Upper (Circular) Blade

Warning!

Risk of hand injury !

 Wear protective gloves while handling the blades.

Fig. 11

Replacement of the upper blade

1. Loosen the knurled knob (9) completely from the blade shaft (10).

2. Rotate the pointer (2) with the knob (4) anti-clockwise into position "16".

3. Remove the circular blade (6) from the blade shaft (10).

Do not lose the spacers (8,11) located on the blade shaft (10), between the blade (6) and the carrier (1).

Replace the spacers (8,11) if necessary.

4. Slide the replacement blade (6) onto the blade shaft as far as possible.

5. Put the knurled knob (9) onto the blade shaft.

6. Move the blade carrier (1) to the center of the lower blade (7).

7. Loosen the cylinder screw (3).

8. Move the knob (4) clockwise until the upper and lower blade gently touch without overlapping.

9. Swing the strut (5) clockwise until you reach the stop and tighten the cylinder screw (3). This adjustment locks the

upper blade in place to prevent it from moving out of adjustment.

10. Adjust the upper blade position  3.4 on page 8.

11. Tighten the knurled knob (9).

12. In the event of the optional dial gauge assembly being available, check the alignment of the blades

 3.6 on page 10.

Type

Part No.

8930509.001 Circular Blade

5 6

Circular Blade

Description

Lineal Blade

Part No.

Description

8933394.001 Lineal Blade 450/370

8933682.001 Lineal Blade 600/520