CAB EOS5 Servis Kılavuzu - Sayfa 12

Kesici CAB EOS5 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. CAB EOS5 20 sayfaları.
Ayrıca CAB EOS5 için: Operatör El Kitabı (15 sayfalar)

Sayfayı Yazdır

1. Table of Contents
2. Instructions
3. Replacing the Print Roller
4. Troubleshooting and Error Treatment
5. Permanent Hardware Faults
6. Failure of Device Functions
7. Block Diagram
8. Layout Diagram Pcb Cpu

Replacing Assembly Units

2.7

Replacing the Stepper Motor

Fig. 7

Removing / mounting stepper motor 1

Removing

 Remove the casing

 Remove the transport module.

 Unplug the connector (2) of the stepper motor (3) from the CPU (1).

 Remove the gearwheels (5) from the axles (6).

Note!

The gearwheels (5) are reachable from the inner side of the chassis through the holes (4) with a pointed tool

and can be pushed that way from the axles.

Fig. 8

Removing / mounting stepper motor 2

 Loosen 3 screws (7) and remove the stepper motor (3).

Mounting

 Mount the assembly units in reverse order.