Cab Technology PCU2/2 Operatör El Kitabı - Sayfa 18

Kesici Cab Technology PCU2/2 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Cab Technology PCU2/2 20 sayfaları. Perforation cutter

Maintenance

6.3 Setting the Initial State of the Cutter

To operate the cutter correctly after cleaning or after changing the blades the

circular blade (4) and the clock wheel (11) must be adjusted to each other.

1. Unscrew the screws (1), (3) and (6, at the rear).

2. Remove the cover (2).

3. Turn the axle (5) of the circular blade with a screwdriver for slotted head

screws (slot width 7 mm) so that the planar area (8) of the blade axle

becomes parallel to the base plate (7).