CABAC BM118 Kullanıcı Kılavuzu - Sayfa 7

Multimetre CABAC BM118 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CABAC BM118 14 sayfaları. Auto-check clamp-on series

AutoCheck

mode

Set the slide-switch function selector to the

feature automatically selects measurement function of DCV, ACV or Resistance (Ω)

based on the input via the test leads.

●With no input, the meter displays "Auto" when it is ready.

●With no voltage signal but a resistance below 6MΩ is present, the meter displays the

resistance value. When below 25Ω (0.025kΩ) is present, the meter further gives a

continuity beep tone.

●When a signal above the threshold of +1.5 VDC, -1 VDC or 2 VAC up to the rated

600V is present, the meter displays the voltage value in appropriate DC or AC,

whichever larger in peak magnitude.

●Overload-Alert Feature: When above rated 600V is present, the meter displays "OL"

with a warning beep tone for over-range indication. Disconnect the test leads from the

signal immediately to avoid hazards.

Note:

●Range-Lock Feature: When a measurement reading is being displayed in

Customer Care Australia P: 13122 F: 1300 303 310 E: [email protected] W:cabac.com.au

A: Distribution Pl, Seven Hills NSW 2147

Customer Care New Zealand P: 0800 966 969 F: 0088 6969 E: [email protected] W: cabac.co.nz

position. This innovative AutoCheck