CABAC T6236B Kullanım Kılavuzları - Sayfa 2

Ölçüm Cihazları CABAC T6236B için çevrimiçi göz atın veya pdf Kullanım Kılavuzları indirin. CABAC T6236B 2 sayfaları. Digital tachometer

Sayfayı Yazdır

CONTACT TCAH

0.1RPM (0.5to 999.9RPM)

1RPM

( over 1000RPM)

WURFACE SPEED

0.01m/min (0.05 to 99.99m/min)

0.1m/min

(over 100m/min)

Panel description:

A: Surface speed wheel

B: Contact test device

C: Contact measuring device

D: Measure button

E: Function switch

F: Memory call button

G: Display window

H: Battery cover

Measuring procedure

1. PHOTO MEASURMNENT

a. Apply a reflective mark to the object being measured. Slide the function

"rpm photo" position.

b. Depress the MEASURE BUTTON and align the visible light beam with the applied target. Verify that the MONITOR INDICATOR lights

when the target aligns with the beam.

2. CONTACT TACH MEASUREMENT

a. Slide the FUNCTION SWITCH to "rpm contact" position. Install the proper RPM ADAPTER on the SHAFT.

b. Depress the MEASURING BUTTON and lightly pressing the RPM ADAPTER against the center hole of rotating shaft. Be certain to keep

alignment straight. Release the MEASURING BUTTON when the display reading stabilizes.

3. SURFACE SPEED MEASUREMENT

a. Slide the FUNCTION SWITCH to "m/min contact" position. Install the SURFACE SPEED WHEEL on the SHAFT instead of the RPM

ADAPTER.

b. Depress the MEASURING BUTTON and simply attaching the SURFACE SPEED WHEEL to the detector. Release the MEASURING

BUTTON when the display reading stabilizes.

Note: Because of the difference between the girth of outer surface and inner flute of line speed sensor. For contact line speed or length

measurement, the displaying result is correct when outer surface of the sensor contacts with the measured object contact and but when inner

flute of the sensor and the measured object, that the reading multiply 0.9 is the real result (eg.: measure wire, cable and rope etc.)

Accessories:

Carrying case

Reflecting tape marks

Operation manual

Damp proof accessories

Bolt bag

Contact speed measurement fitting

Contact rotational speed measurement fitting

Customer Care Australia P: 13122 F: 1300 303 310 E: [email protected] W:cabac.com.au

A: Distribution Pl, Seven Hills NSW 2147

Customer Care New Zealand P: 0800 966 969 F: 0088 6969 E: [email protected] W: cabac.co.nz

1pc

length 600mm

1pc

3pc

switch to