Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector Hızlı Kurulum Kılavuzu - Sayfa 4
Projektör Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector 7 sayfaları. Epson powerlite home 10: quick setup
Ayrıca Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector için: Kullanıcı El Kitabı (13 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
4
Plug in and turn on
1
Remove the lens cover.
2
Connect one end of the power cord to the projector and
plug the other end into an electrical outlet.
The
3
Turn on your equipment. (If you are connecting to a computer,
don't turn it on yet. Wait until you've turned on the projector.)
4
Press the
You hear a beep, the
projector lamp comes on in about 45 seconds.
Power button
The projector automatically detects your video source and
begins projecting.
Turning off the projector
1
When you're finished using the projector, turn off your
video equipment.
2
Press the
3
When you see the confirmation message, press the
button again. The
cools down.
4
When the
5
Store the remote control in
its holder on the back of the
projector. (Part of the remote
control will stick out when
it's fully inserted.)
Caution:
power light turns orange.
Power light
Power button on the projector or remote control.
Power button on the projector or remote control.
power light flashes orange as the projector
power light is a steady orange, unplug the projector.
Never unplug the projector when the
green or flashing orange.
power light flashes green, and the
Power
power light is