Epson V11H180020-N - PowerLite Home 20 Kullanıcı Kılavuzu - Sayfa 33
Projektör Epson V11H180020-N - PowerLite Home 20 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson V11H180020-N - PowerLite Home 20 50 sayfaları. Epson esc/vp21 modem: users guide
Ayrıca Epson V11H180020-N - PowerLite Home 20 için: Hızlı Kurulum Kılavuzu (7 sayfalar), Kullanıcı Kılavuzu (1 sayfalar)
Sayfayı Yazdır
The projector turns itself off after a period of time.
The projector's Sleep Mode function may be turned on. This causes the projector to turn
itself off if it hasn't received any input signals for a specified period of time. You can turn the
Sleep Mode setting off. See page 22.
The projector turns on by itself.
If you are using the Direct Power ON feature, the projector turns on automatically when you
plug it into an electrical outlet (see page 22). It may also turn itself on after power outages, or
after any temporary interruption of power. Make sure your electrical outlet isn't controlled by
a wall switch or timer.
There is no sound coming from the projector.
Make sure audio cables are connected to the
turned on.
Use the
and
sound output from the projector's speaker.
Press the
A/V Mute
haven't been turned off temporarily.
The projector doesn't respond to remote control commands.
Make sure you're within 20 feet of the projector, and within range of the projector's front
or back sensor (approximately 30° left or right, and 15° above or below).
You may need to replace the remote control's batteries. Make sure they're inserted with
the positive (+) ends facing the bottom of the remote, as shown on the Quick Setup sheet.
Dim the room lights and turn off any fluorescent lights. Make sure the projector is not in
direct sunlight.
Turn off nearby equipment that emits infrared energy, such as a radiant room heater.
buttons on the projector or remote control to adjust the
Volume
button on the remote control to make sure the picture and sound
port, and your audio equipment is
Audio
33
Problem Solving