Cisco 1800 Series Yapılandırma - Sayfa 24
Kablosuz Erişim Noktası Cisco 1800 Series için çevrimiçi göz atın veya pdf Yapılandırma indirin. Cisco 1800 Series 32 sayfaları. Cisco ios software configuration
Ayrıca Cisco 1800 Series için: Hızlı Başlangıç Kılavuzu (28 sayfalar), Veri Sayfası (16 sayfalar)
Sayfayı Yazdır
How to Configure Radio Settings on an Access Point
Configuring Maximum Data Retry on an Access Point
Perform this task to specify the number of attempts the AP makes to send a packet before giving up and
dropping the packet.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface dot11Radio interface
Example:
Router(config)# interface dot11Radio 0/3/0
Step 4
packet retries number
Example:
Router(config-if)# rts retries 30
Step 5
end
Example:
Router(config-if)# end
Step 6
copy running-config startup-config
Example:
Router# copy running-config startup-config
24
enable
configure terminal
interface dot11Radio interface
packet retries number
end
copy running-config startup-config
Configuring Radio Settings on an Access Point
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enters radio interface configuration mode.
The interface argument is in module/slot/port format,
•
except for the Cisco 800 series and Cisco 1800 series
fixed-configuration routers, where the interface
argument is either 0 or 1.
The 2.4-GHz radio is port 0, and the 5-GHz radio is
•
port 1.
Specifies the number of attempts the AP makes to send a
packet before giving up and dropping the packet.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.