Cisco 500 Series Manuel - Sayfa 14

Kablosuz Erişim Noktası Cisco 500 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco 500 Series 24 sayfaları. Stackable managed switches
Ayrıca Cisco 500 Series için: Güvenlik Bilgileri Kılavuzu (42 sayfalar), Manuel (4 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (21 sayfalar), Veri Sayfası (5 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (46 sayfalar), Manuel (40 sayfalar), Yönetim Kılavuzu (48 sayfalar), Sorun Giderme ve Bakım (15 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar), Hızlı Başlangıç Kılavuzu (25 sayfalar)

Change Your Headset Ringer Settings

You can change your headset ringtone behavior on Cisco IP Phones with Phone Firmware 14.0 or later. The

setting is saved on the phone and will apply to any Cisco Headset 500 Series that connects.

Procedure

Step 1

Press Applications

Step 2

Select Preferences > Headset ringer.

Step 3

Select a ringer setting.

By default, your phone follows the behavior of the phone ringer settings. Select On if you want to always

hear the phone ring when you have an incoming call. If you select Off, you won't hear any ring through your

headset when there is an incoming call.

Step 4

Select Set to apply your settings.

Update Your Cisco Headset Firmware With a Cisco IP Phone

You can update your headset software on any supported Cisco IP Phone. During a headset firmware upgrade,

you can view the progress on your phone screen.

Procedure

Step 1

Connect your headset to a Cisco IP Phone.

Step 2

If the headset does not automatically begin to update, restart the phone. The phone downloads the latest headset

version file when the phone restarts and uploads it to the headset.

Configure a Headset on the Phone

After you have connected the headset, you may have to configure it on your phone.

Reset Cisco Headset Settings from Your Phone

You can reset your Cisco headset to remove your custom settings. This action returns the headset to the original

configuration set by your administrator.

Your phone must be running Firmware Release 12.5(1)SR3 or later for this feature to function.

Before you begin

Connect your headset to the phone:

• Cisco Headset 520 Series: Connect with the USB adapter

• Cisco Headset 530 Series: Connect with the USB cable

Accessories