Cisco 800 Series Sürüm Notları - Sayfa 14

Kablosuz Erişim Noktası Cisco 800 Series için çevrimiçi göz atın veya pdf Sürüm Notları indirin. Cisco 800 Series 36 sayfaları. Fast step software design guide
Ayrıca Cisco 800 Series için: Hızlı Başlangıç Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (17 sayfalar), Yapılandırma (32 sayfalar), Tasarım Kılavuzu (50 sayfalar)

Sayfayı Yazdır
Cisco 800 Series Sürüm Notları
New and Changed Information
Silent FAX Calls
This feature allows either POTS port to be configured as a Type 2 Smart Fax port. When configured in
this way, the router will not generate a ring alert when a call comes into the port, but will instead generate
a silent fax tone to which a Type 2 Smart Fax analog device will respond. The fax machine does not ring,
but the fax call gets connected. If a phone is connected instead of a fax machine, the phone will not ring.
Port configuration is accomplished with CLI commands.
silent-fax
no silent-fax
By default, this feature is disabled.
The following is an example of a silent fax call configuration:
router# configure terminal
router(config)# dial-peer voice 1 pots
router(config-dial-peer)# silent-fax
The following is an example of the silent fax configuration output:
dial-peer voice 1 pots
caller-id
no forward-to-unused-port
call-waiting
ring 0
no silent-fax
registered-caller ring 1
port 1
volume 3
destination-pattern 7773000
!
dial-peer voice 2 pots
caller-id
no forward-to-unused-port
call-waiting
ring 0
no silent-fax
registered-caller ring 1
port 2
volume 3
destination-pattern 7773100
!
Support for PIAFS
This feature provides support for the Personal Handy-Phone System (PHS) Internet Access Forum
Standard (PIAFS). PIAFS is a standard error correction protocol for cellular data communication which has
been developed in Japan. It is designed to pass data over the PHS cellular system. It also provides
transmission control procedures (comparable to OSI reference model layer 2) for high quality data
transmission. Both PIAFS version 2.0 and version 2.1 are supported on the 811 and 813 routers.
The common applications that are supported using PIAFS in PHS data communications are:
•
•
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
14
Email service
This enables the user to send and receive emails. Email is a basic service of the PHS multimedia
communications menu.
Fax Service
This enable faxing of data stored in a Personal Digital Assistant (PDA).
78-12776-04