Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External Kullanıcı Kılavuzu - Sayfa 17
Kablosuz Erişim Noktası Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External 36 sayfaları. Aironet 1100/1200 series
Ayrıca Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External için: Sipariş Kılavuzu (6 sayfalar)
Sayfayı Yazdır
Removing the Blank Spacer Card
When your access point is not configured with a 2.4-GHz radio, it contains a
blank spacer card in the internal mini-PCI connector. You must remove the
blank spacer card prior to installing your 802.11g radio. If you are replacing
an existing 2.4-GHz radio, go to the
page
20.
Caution
Handle all components carefully and observe all ESD
precautions. The internal access point components can be
damaged by ESD if not handled properly.
Follow these steps to remove the blank spacer card from the mini-PCI
connector. It may be helpful to refer to the following illustration before you
proceed.
"Removing a 2.4-GHz Radio" section on
17