Cisco AIR-AP1832I K9 Series Başlangıç Kılavuzu - Sayfa 7

Kablosuz Erişim Noktası Cisco AIR-AP1832I K9 Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco AIR-AP1832I K9 Series 44 sayfaları.

Sayfayı Yazdır

This product and all interconnected equipment must be installed indoors within the same

Caution

building, including the associated LAN connections as defined by Environment A of the

IEEE 802.3af/at Standard.

The access point is suitable for use in environmental air space in accordance with section

Note

300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the

Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power

injector in air handling spaces.

Use only with listed Information Technology Equipment (ITE) equipment. For more

Note

information on ITE equipment, refer to article 645 of the latest National Electrical Code

(NEC).

Unpacking the AP

To unpack the access point, follow these steps:

Unpack and remove the access point and the mounting accessories, from the shipping box.

Step 1

Return any packing material to the shipping container and save it for future use.

Step 2

Step 3

Verify that you have received the items listed below. If any item is missing or damaged, contact

your Cisco representative or reseller for instructions.

The access point

–

Mounting bracket (AIR-AP-BRACKET-1= or AIR-AP-BRACKET-2=, only if selected when

–

you ordered the access point)

T-RAIL clips and Channel Adapter (only if selected when you ordered the access point)

–