Cisco AIR-LAP1310G Montaj Talimatları - Sayfa 16

Kablosuz Erişim Noktası Cisco AIR-LAP1310G için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Cisco AIR-LAP1310G 40 sayfaları. Cisco aironet 1300 series lightweight outdoor access point

Sayfayı Yazdır

1. Mounting the Access Point

Mounting the Access Point

To mount the access point on a rooftop or wall, follow these steps:

Step 1

Choose a mounting location for the access point. If you are using the integrated antenna, the mounting

location must provide a clear signal path to the remote access point. For more information, see

"Choosing a Mounting Location" section on page

Step 2

Find a solid mounting position for the base bracket, such as a stud or main building member on a roof

or external wall. It may be necessary to utilize a stud finder to find wooden structural members.

Assemble the rooftop mount. For more information, see the

Step 3

on page

Mount the rooftop bracket at the mounting location using the following user-provided hardware:

Step 4

•

Figure 4

Make sure that the mounting pole is vertical. You can rotate the foot of the bracket to adjust the vertical

position for wall or sloped-roof mounting locations.

Step 5

Tighten the bolts to secure the mounting pole to the mounting foot. Torque nuts to 12 to 14 ft-lb.

Step 6

Attach the access point to the vertical section of the pole using the supplied brackets and hardware. For

more information, see the

Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions

26.

Wooden structure—four 1/4 x 2 inch (minimum) lag bolts

Concrete structure—four 1/4 x 1 inch (minimum) bolts with concrete anchors

shows the rooftop mast assembly:

Roof-Mount Mast

"Assembling the Mounting Hardware" section on page

"Assembling the Rooftop Mount" section

26.

78-17634-01