DigitaLinx DL-HD2100 Hızlı Kurulum Kılavuzu - Sayfa 3
Genişletici DigitaLinx DL-HD2100 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. DigitaLinx DL-HD2100 8 sayfaları. Hdbaset extender set
Ayrıca DigitaLinx DL-HD2100 için: Hızlı Kurulum Kılavuzu (8 sayfalar), Kullanıcı El Kitabı (17 sayfalar)
Sayfayı Yazdır
1.
FRONT PANEL DIAGNOSTIC LEDs;
• POWER -Solid, the DL-HD2100 extender is receiving power from the power supply or from the remote extender
via Category 6 cabling.
• STATUS - Flashes once per second, the HDBaseT processor is running.
• HDCP - Solid, HDCP signal is present in the HDMI stream. Flashes quickly, non-encrypted HDCP signal is present
in the HDMI stream.
• LINK - Solid, the two DL-HD2100 components are communicati ng via Category cabling.
2.
DC 12V
• Locking power port, connect DC12V power adapter to transmitt er (either power port on transmitt er and
receiver can power enti re set)
3.
HDBT OUT
• RJ45 HDBaseT connecti on. Connect Cat6 cable to receiver
4.
IR In / IR OUT
• 3.5mm IR input port for connecti on to IR receiver or IR system
• 3.5mm IR output port for connecti on to IR emitt er
5.
AUDIO OUT
• Analog audio de-embedding port for routi ng stereo audio to audio amplifi er / mixer
6.
RS232
• 3 pin Phoenix connector port for connecti ng / passing RS232 control to receiver / display locati on
7.
HDMI In
• HDMI input port for connecti ons to video sources
8.
Ethernet
• RJ45 port for passing Ethernet to receiver / display locati on
9.
TOSLINK OUT
• Digital audio return channel output port for routi ng multi -channel from DL-HD2100 receiver to audio amplifi er
or mixer
Transmitt er
1
2
3
4
5
6
7
8
9