DigitaLinx DL-HDFO Kullanıcı Kılavuzu - Sayfa 7

Genişletici DigitaLinx DL-HDFO için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DigitaLinx DL-HDFO 13 sayfaları. Fiber optic extender

Important: Please ensure the installation procedure below is followed.

Improper operation or no operation of the devices may result if these are

not followed. Installation assumes Fiber Cable(s) and Category 5/5e cable is

previously installed and has been confirmed good.

1.) Carefully unpack the contents of the shipping package and verify all

Important: Please ensure the installation procedure below is followed. Improper operation or no

operation of the devices may result if these are not followed. Installation assumes Fiber Cable(s) and

components are present.

Category 5/5e cable is previously installed and has been confirmed good.

2.) With all components powered down (HDMI source and Display) connect the

Important: Please ensure the installation procedure below is followed. Improper operation or no

1.) Carefully unpack the contents of the shipping package and verify all components are present.

TX box to the HDMI source using a copper HDMI interconnect cable from 1-8

operation of the devices may result if these are not followed. Installation assumes Fiber Cable(s) and

2.) With all components powered down (HDMI source and Display) connect the TX box to the HDMI

meters in length.

Category 5/5e cable is previously installed and has been confirmed good.

source using a copper HDMI interconnect cable from 1-8 meters in length.

1.) Carefully unpack the contents of the shipping package and verify all components are present.

2.) With all components powered down (HDMI source and Display) connect the TX box to the HDMI

source using a copper HDMI interconnect cable from 1-8 meters in length.

3.) With all components powered down (HDMI source and Display) connect the

3.) With all components powered down (HDMI source and Display) connect the RX box to the

RX box to the HDMI Display using a copper HDMI interconnect cable from 1-8

HDMI Display using a copper HDMI interconnect cable from 1-8 meters in length.

meters in length.

3.) With all components powered down (HDMI source and Display) connect the RX box to the

HDMI Display using a copper HDMI interconnect cable from 1-8 meters in length.

Installation Procedures

HDMI or DVI Source Unit

DL-HDFO TX Unit

Display Unit

DL-HDFO RX Unit

Installation

LWC

Page 1-6

Installation

1-6