Epson VS350 Hızlı Kurulum

Projektör Epson VS350 için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Epson VS350 4 sayfaları.

Sayfayı Yazdır

VS250/VS350/VS355

Quick Setup

Before using the projector, make sure you read the safety instructions in the

online User's Guide.

Note: Your product may differ from the illustrations on this sheet, but the

instructions are the same.

Connect the projector

Choose from the following connections. See the sections below or the online

User's Guide for details.

Computer

Computer port

Connect one end of a VGA cable to the projector's Computer port, and the

other end to your laptop or computer's

your laptop to external display (see "Troubleshooting" on this sheet). You can

also connect an audio cable.

HDMI port

Connect one end of an HDMI cable to the projector's HDMI port and the other

end to an HDMI port on your computer.

USB port

Connect the square end of a USB cable to the projector's USB-B (square) port.

Connect the flat end of the cable to any USB port on your computer.

Windows Vista

or later: After turning on the projector, follow the on-screen

instructions to install the Epson

USB Display software (EMP_UDSE.EXE; only

on first connection). If the software screen does not display automatically, open

My Computer or Computer, then double-click EPSON_PJ_UD.

OS X 10.7.x or higher: After turning on the projector, the setup folder for

USB Display appears in the Finder. Double-click USB Display Installer and

follow the on-screen instructions to install the Epson USB Display software

(only on first connection).

Video device

Connect multiple video devices and use the Source Search button on the

projector or the remote control to switch between them.

USB cable

HDMI cable

VGA cable

Audio cable

monitor port. Make sure to switch

Component video

to VGA cable

HDMI cable

RCA video cable

(composite video)

RCA audio cable

USB device

Connect a digital camera, USB flash drive, or USB storage device to the

projector's USB-A (flat) port.

If you connect a digital camera, USB flash drive, or USB storage device, you can

use the projector's PC Free feature. See the online User's Guide for details.

Turn on your equipment

Turn on your computer or video source.

Plug in the projector. The power light on the projector turns blue.

Open the A/V Mute slide all the way.

Press the

power button on the projector or remote control. The

projector beeps, the Status light flashes blue, and then stays on.

Note: To shut down the projector, press the

Use the arrow buttons on the remote control to highlight any of the

options on the Home screen that appears, then press

You can switch between projection sources and quickly access various

adjustment options from this screen.

The default language of the menu system is English. To select another

language, press the Menu button on the projector or remote control.

Select Extended and press

your language and press

system.

USB cable

power button twice.

to select it.

. Select Language and press

. Press the Menu button to exit the menu

. Select