DigitaLinx DL-2H1V1U-WP-W Hızlı Kurulum Kılavuzu - Sayfa 6
Verici DigitaLinx DL-2H1V1U-WP-W için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. DigitaLinx DL-2H1V1U-WP-W 8 sayfaları.
Sayfayı YazdırDL-2H1V1U-WP-W Quick Guide
Cabling Wiring Requirements
HDBaseT Cabling
To ensure proper performance of the DL-2H1V1U-WP-W, it is recommended that you
use solid core, shielded Category 6 F/UTP cabling at a minimum. Category 5e F/UTP may
perform well but may not support power over HDBaseT reliably over longer distances.
For optimized HDBaseT performance use the following Liberty Wire and Cable branded
cabling;
Category 6 plenum; 24-4P-P-L6SH
Category 6A plenum; 24-4P-P-L6ASH
Category 6 NON-plenum; 24-4P-L6SH
Category 6A NON -plenum; 24-4P-L6ASH
6
When using shielded category cabling ALWAYS...
....use shielded connectors
....properly ground the category cable
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category 6
connection between send and receive
units.