ARGENTO Minimax Kullanıcı Kılavuzu - Sayfa 12

Bisiklet ARGENTO Minimax için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ARGENTO Minimax 20 sayfaları. Electric pedal-assisted cycle

6. ASSEMBLY

1. Carefully remove the bike from the

packaging, then remove all the protective

material, being careful not to scratch the

painted parts and not pull the bike cables.

The removal of the bike from the packaging

must be carried out by two adults, in order to

avoid injuries or crushing.

2. Place the handlebar stem in its correct

vertical position, being careful when

tightening the handlebar stem through its own

locking device (letter A on the right picture)

From the handlebar stem remove first the

screw (number 1 on the right picture) , then

the lever (number 2 on the right picture), then

remove the bronze color metal plate (number

3 on the right picture) and at last take out the

black metal plate (number 4 on the right

picture).

3. Place the handlebar on the handlebar

stem, procede to put back all the 4 parts

previously pulled out. Be sure to tighten well

the handlebar in order not to incur injuries

while riding the bike.

4. Make sure to orient the saddle and tighten

the seat post correctly with the appropriate

device on the frame as shown in the photo on

the right. Do not raise the seat post beyond

the limit of 15 cm to avoid breaking the

frame and serious injuries while riding.