Epson 3880 - Stylus Pro Color Inkjet Printer Ağ Kılavuzu - Sayfa 16

Hepsi Bir Arada Yazıcı Epson 3880 - Stylus Pro Color Inkjet Printer için çevrimiçi göz atın veya pdf Ağ Kılavuzu indirin. Epson 3880 - Stylus Pro Color Inkjet Printer 39 sayfaları. Printer
Ayrıca Epson 3880 - Stylus Pro Color Inkjet Printer için: Broşür (3 sayfalar), Teknik Özellikler (2 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Buradan başlayın (2 sayfalar), Buradan Başlayın Kılavuzu (6 sayfalar), Sınırlı Garanti (12 sayfalar), Renk Yönetimi Kılavuzu (47 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Ağ Kılavuzu (38 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Setting Up the Network Interface

Follow the instructions below to connect the network interface to the network.

1. Make sure that your printer is turned off.

2. Connect one end of the network cable to the RJ-45 connector on the

network interface, and the other end to the network.

Caution:

❏ You must use a Category 5 shielded twisted-pair cable to connect the

network interface to prevent malfunction.

❏ Do not connect or disconnect the network cable when the printer is on.

Note:

You can use both 10Base-T and 100Base-TX. When you print a lot of data, we

recommend using the highest speed available for your product with light network

traffic.

3. Turn on your printer.

Note for Mac OS X:

Since the printer supports Bonjour and is on by default, you can use the printer on

a network just by connecting it to the network. If you want to disable the Bonjour

setting, use the printer's control panel. See "Configuring the Network Interface"

on page 17 for details.

Now you can configure the network interface to use TCP/IP on the network

and print a network status sheet.

Setting Up Your System for Network Printing