Cisco Catalyst 9117AX Series Başlangıç Kılavuzu - Sayfa 13
Kablosuz Erişim Noktası Cisco Catalyst 9117AX Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco Catalyst 9117AX Series 36 sayfaları.
Sayfayı Yazdır
Cisco Catalyst 9117AX Series Access Points
9
Mounting the Access Point
Cisco Catalyst 9117AX series access points can be mounted in several configurations – on a suspended ceiling, on a
hard ceiling or wall, on an electrical or network box, and above a suspended ceiling.
For access point mounting instructions, go to the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mounting/guide/apmount.html
The standard mounting hardware supported by the AP is listed in
Table 1
Brackets and Clips for Mounting the AP
Part Number
1
Brackets
AIR-AP-BRACKET-1
AIR-AP-BRACKET-2
Clips
AIR-AP-T-RAIL-R
AIR-AP-T-RAIL-F
AIR-CHNL-ADAPTER
1. Mount the AP using no less than four screw holes on a bracket.
When mounting the AP in areas where there is a possibility of the AP being knocked off the mounting bracket, use the
lock hasp on the back of the AP (see
Figure 4
Locking the AP to the Bracket
1
Position of the hasps for the locks on the back of the 9117AXI models
Description
Low-profile bracket
(This is the default option)
Universal bracket
Ceiling Grid Clip (Recessed mounting)
(This is the default option)
Ceiling Grid Clip (Flush mounting)
Optional adapter for channel-rail ceiling grid profile.
Figure
4) to lock it to the bracket.
13
Table
1.