Cisco Catalyst IW9165E Hızlı Başlangıç Kılavuzu

Kablosuz Erişim Noktası Cisco Catalyst IW9165E için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco Catalyst IW9165E 16 sayfaları.

Sayfayı Yazdır

Installation Overview

•

Preinstallation Checks and Installation Guidelines

Before you mount and deploy your access point, we recommend that you perform a site survey (or use the

Site Planning tool) to determine the best location to install your access point.

You should have the following information about your wireless network available:

• Access point locations

• Access point mounting options: To a vertical or horizontal wall or a DIN rail

• Access point power options: Use either of the following options to power the AP:

• Operating temperature: -40° to +158°F (-40° to +70°C) with still air.

• Console access using the console port

Note

Preinstallation Checks and Installation Guidelines, on page 1

Mounting the Access Point, on page 2

Grounding the Access Point, on page 9

Powering the Access Point, on page 11

Connecting an Ethernet Cable to the Access Point, on page 13

• DC power input

• Cisco-approved power injector

• 802.3at (PoE+), 802.3bt, and Cisco Universal PoE (Cisco UPOE)

We recommend that you use a console cable that is one meter or less in length.

The AP may face issues while booting if you use an unterminated console cable

(not plugged into any device or terminal) or a console cable that is more than one

meter in length.

Installation Overview