Cisco Linksys WAP54GX Hızlı Kurulum

Kablosuz Erişim Noktası Cisco Linksys WAP54GX için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Cisco Linksys WAP54GX 2 sayfaları. Wireless-g access point with srx

Sayfayı Yazdır
®
A Division of Cisco Systems, Inc.
Package Contents
• Wireless-G Access Point with SRX
• Power Adapter
• Setup CD with User Guide
(English only)
• Ethernet Network Cable
2
4 ,
GHz
Wireless-G
802.11g
Access Point with SRX
Wireless
Quick Installation
Model No.
WAP54GX (EU/LA/UK)
Model No.
1
Connect the Access Point
A
Connect your Ethernet network
cable to your network router or
switch. Then connect the other
end of the network cable to
A
the Access Point's Ethernet
network port.
B
Connect the included power
adapter to the Access Point's
Power port. Then plug the
power adapter into an
B
electrical outlet. The LEDs on
the front panel will light up as
soon as the Access Point
powers on.
2
Configure the Access Point
A
Insert the Setup CD into your
NOTE:
If your computer does not
PC's CD-ROM drive. The Setup
run Windows 2000 or XP, use the
Wizard should run
Web-based Utility to configure the
automatically, and the
Access Point. Refer to the Quick
Welcome screen should
Installation Guide on the Setup CD
appear. If it does not, click
for more information.
Start and select Run. Enter
D:\setup.exe (if "D" is the letter
of your PC's CD-ROM drive).
B
On the Welcome screen, click
Click Here to Start.
C
The following screens display
how the Access Point should
be connected during this
B
Setup Wizard. Optimally, you
should set up the Access Point
using a PC on your wired
network. Click Next.
D
Check the cable connecting
the Access Point to your
network router or switch. Click
Next.
C
D
E
Make sure the Access Point is
powered on. Click Next.
F
Make sure the Access Point's
Power, Act, and Link LEDs are lit.
If they are not, check the
cable connections. Click Next.
G
E
The Setup Wizard will search for
the Access Point within your
network and display a list of all
access points. If more than
one are displayed, select the
Access Point by clicking on it.
Then click Yes to change its
settings.
H
You will be asked to sign onto
F
the Access Point you have
selected. Enter the default
password, admin. Then click
Enter.
G
H