Cisco MR53 Kurulum Kılavuzu - Sayfa 15

Kablosuz Erişim Noktası Cisco MR53 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco MR53 17 sayfaları. Dual-band enterprise class 802.11ac wave 2 cloud-managed access point

Sayfayı Yazdır

To release the AP from the mount cradle, first remove the security screw that secures the AP to the cradle's bottom tab.

While holding the AP with one hand, press the cradle's bottom tab upwards, releasing the AP from the bottom of the

cradle. Then remove the AP from the cradle's top tab.

Desk or Shelf Mount

The MR52 and MR53 can both be placed on a desk or shelf resting on the non-scratch rubber feet. The mount cradle is

not necessary for a desk or shelf installation.

Secure the AP

Depending on your mounting environment, you may want to secure the AP to its mount location. The MR52 and

MR53 can both be secured in several ways. If the AP has been installed using the mount cradle, it should be secured

via security screw (Torx security screws are included) and/or Kensington lock. If the mount cradle was not used, the

AP can still be secured using a Kensington lock.

Security Screw

Install the security screw in the lower mount cradle tab.

Kensington Lock

Attach a Kensington lock cable to the access point at the hard point on the side of the device.

Attach the other end of the cable to a secure location, such as a pipe or building ﬁxture.