Cisco Small Business AP541N Hızlı Başlangıç Kılavuzu - Sayfa 3
Kablosuz Erişim Noktası Cisco Small Business AP541N için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco Small Business AP541N 17 sayfaları. Small business pro series dual-band single-radio access point
Ayrıca Cisco Small Business AP541N için: Broşür (2 sayfalar), Hızlı Başlangıç Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Before you connect your access point to the network or
C
AUTION
power it on, read the
Configuration"
Label
PWR
PoE
Diag
Speed
LAN
WLAN 2.4G
WLAN 5.0G
Back Panel Ports
Ethernet Port—An auto-sensing, Gigabit Ethernet (802.3) port that
supports Power-over-Ethernet (PoE).
We recommend using Cat5e or better cable. Also, do not exceed
N
OTE
the maximum cabling distance of 328 feet (100 meters) per
segment.
ANT01, ANT02, ANT03—RP-SMA connectors that accept the antennas
provided with the access point.
2
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
section.
Activity
green
flash green
green
red
off
amber
green
solid green
flash green
solid green
flash green
off
solid green
flash green
off
"Getting Started with the
Description
Powered on.
Firmware upgrade.
Power-over-Ethernet (PoE) is powering
the access point.
Power-on-self-test (POST).
Data speed is zero or 10 Mbps.
Data speed is 100 Mbps.
Data speed is 1000 Mbps.
A wired network link is established.
Passing traffic.
A 2.4 GHz wireless network link is
established.
Passing traffic.
The 2.4 GHz radio is off.
A 5.0 GHz wireless network link is
established.
Passing traffic.
The 5.0 GHz radio is off.