Cisco Small Business WAP561 Hızlı Başlangıç Kılavuzu - Sayfa 6
Kablosuz Erişim Noktası Cisco Small Business WAP561 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco Small Business WAP561 13 sayfaları. Reboot and reset to factory default settings
Ayrıca Cisco Small Business WAP561 için: Veri Sayfası (8 sayfalar), İnceleme (6 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Manuel (4 sayfalar)
Sayfayı Yazdır
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Power
Off
Solid Green
Flashing Green
Solid Red
Off
WLAN
Solid Green
Solid Amber
Solid Blue
Flashing
Off
LAN
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
6
Description
The device has no power.
The device is powered on. Normal operation.
Upgrading firmware or acquiring an IPv4
address.
Booting or firmware upgrade failed.
Wireless is disabled, for both Radio 1 and
Radio 2 wireless networks
Wireless Radio 1 is in use.
Wireless Radio 2 is in use.
(Cisco WAP561 only) Wireless Radios 1 and 2
are operating in concurrent mode.
Transmitting or receiving data.
No Ethernet link.
GE Ethernet link is active.
FE Ethernet link is active.
Transmitting or receiving data.
Cisco WAP551 and WAP561 Wireless-N Access Points