Cisco WAP131 Hızlı Başlangıç Kılavuzu - Sayfa 4

Kablosuz Erişim Noktası Cisco WAP131 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco WAP131 13 sayfaları. Reboot and reset factory default settings
Ayrıca Cisco WAP131 için: Hızlı Başlangıç Kılavuzu (13 sayfalar), Manuel (4 sayfalar), Manuel (4 sayfalar)

Sayfayı Yazdır
Cisco WAP131 Hızlı Başlangıç Kılavuzu

Connecting the Cisco WAP131

4
The default configuration of the Cisco WAP131 has the Wi-Fi radio turned
off. You must perform the initial configuration using a wired Ethernet
connection.
To connect the Cisco WAP131 to the wired network:
Connect the Ethernet cable to the Ethernet port of a switch, a router,
S
1
TEP
or a PC.
Connect the other end of the network Ethernet cable to the
S
2
TEP
Ethernet port of the Cisco WAP131.
If PoE is not provided, plug in the supplied power adapter to
S
3
TEP
provide power to the Cisco WAP131.
After installation, all lights should be active. Refer to
Hardware Installation, page 5
Cisco WAP131.
4
for details about the different lights on the
Cisco WAP131 Quick Start Guide
Verifying the