Cisco WAP300 Series Manuel - Sayfa 3

Kablosuz Erişim Noktası Cisco WAP300 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco WAP300 Series 4 sayfaları. Reboot and reset to factory default settings

Sayfayı Yazdır
Cisco WAP300 Series Manuel
You should now have rebooted your device.
Reset to Factory Default Settings
There are two ways to reset the WAP to factory default settings:
Hardware reset
Reset through the web-based utility
Hardware Reset
Step 1. Press the Reset button for more than 10 seconds until the lights go off.
Step 2. Release the Reset button when the lights turn back on.
Reset through the Web-based Utility
Step 1. Log in to the web-based utility of your WAP and choose Administration > Reboot.