Cisco WAP300N Kullanıcı Kılavuzu - Sayfa 20

Kablosuz Erişim Noktası Cisco WAP300N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco WAP300N 30 sayfaları.
Ayrıca Cisco WAP300N için: Manuel (9 sayfalar)

Sayfayı Yazdır

Linksys WAP300N

How to set up Wireless Bridge Mode

To set up Wireless Bridge mode:

Wireless > Basic Wireless Settings

1. Log into the browser-based utility (see "How to open the browser-based

utility" on page 8)

2. Click the Wireless tab, then click the Basic Wireless Settings page

Local Wi-Fi MAC Address—The Wi-Fi MAC address of this device

Remote Wireless Bridges' Wi-Fi MAC Addresses—Enter the Wi-Fi

MAC addresses of other WAP300N wireless bridges that you want this

WAP300N to connect to

Wireless Band—Select the 2 4 GHz or 5 GHz radio band The 5 GHz band

is less crowded than the 2 4 GHz band, so that band is more likely to be

free from interference

Channel Width—For best performance in a Wireless-N network, select

40 MHz only (available only in the 5 GHz radio band) or Auto In Auto

mode, this device and other WAP300N devices connected to this one

automatically switch to the 40 MHz mode if there is no interference

Channel—Choose the operating channel for your wireless network

CAUTION

While in Wireless Bridge mode, this device can communicate with

other WAP300N devices only if they are also in Wireless Bridge mode

and the wireless settings are all identical

Example 1

You want to connect two wired networks together using Two WAP300N

devices One WAP300N will need to be on each network We will call one (A)

and the other (B) To make this work:

1. Enter (A)'s Local Wi-Fi MAC Address into (B)'s Remote Wireless Bridges' Wi-

Fi MAC Addresses field

2. Enter (B)'s Local Wi-Fi MAC Address into (A)'s Remote Wireless Bridges' Wi-

Fi MAC Addresses field

Example 2

You want to connect three wired networks together using three WAP300N

devices One WAP300N will need to be on each network In this example, they

will be called (A), (B), and (C) To make this work:

1. Enter (A)'s and (C)'s Local Wi-Fi MAC Addresses into (B)'s Remote Wireless

Bridges' Wi-Fi MAC Addresses field

2. Enter (B)'s Local Wi-Fi MAC Address into (A)'s Remote Wireless Bridges' Wi-

Fi MAC Addresses field

3. Enter (B)'s Local Wi-Fi MAC Address into (C)'s Remote Wireless Bridges' Wi-

Fi MAC Addresses field

This establishes a wireless connection between (A) and (B) and another

connection between (B) and (C) This approach links all three wired

networks together

CAUTION

Do not create a loop in your network In the above example, a

loop would be adding an (A)-to-(C) wireless connection, while you

already had an (A)-to-(B) and (B)-to-(C) wireless connection

Setting Up: Basics