Cisco WAP371 Hızlı Başlangıç Kılavuzu - Sayfa 10

Kablosuz Erişim Noktası Cisco WAP371 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco WAP371 38 sayfaları. Reboot and reset to factory default settings
Ayrıca Cisco WAP371 için: Hızlı Başlangıç Kılavuzu (15 sayfalar), Manuel (5 sayfalar), Manuel (4 sayfalar)

Sayfayı Yazdır

Rebooting the Devices or Returning them to their

Factory Default Settings

To reboot your device:

• When the power supply is PoE, unplug your Ethernet connection for three seconds

and plug it back in.

• With the power on, press the Reset button with an opened paperclip for less than

three seconds, or until the lights go off.

–

When all the lights go off, release the Reset button.

–

Release the Reset button as soon as the lights go off, or you will restore the

device to factory default settings and lose your configurations.

To reset the device to factory default settings:

• With the power on, press and hold the Reset button with an opened paperclip for

more than 10 seconds.

–

All of the lights will go off.

–

Release the Reset button when the power light turns on.

Cisco Small Business WAP371 Series Wireless Access Point