Cisco WAP371 Hızlı Başlangıç Kılavuzu - Sayfa 4

Kablosuz Erişim Noktası Cisco WAP371 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco WAP371 38 sayfaları. Reboot and reset to factory default settings
Ayrıca Cisco WAP371 için: Hızlı Başlangıç Kılavuzu (15 sayfalar), Manuel (5 sayfalar), Manuel (4 sayfalar)

Sayfayı Yazdır

Mounting the Cisco WAP371 Wireless-AC/N Dual

Radio Access Point with Single Point Setup

You can place your access point on a desktop, or mount it on a wall or ceiling.

Placement Tips

• Ambient Temperature—To prevent the access point from overheating, do not

operate it in an area that exceeds an ambient temperature of 104°F (40°C).

• Air Flow—Both side panels have vents that must be unobstructed to prevent

overheating.

• Mechanical Loading—The device should be level, stable, and secure to prevent it

from sliding or shifting out of position.

Wall and Ceiling Mounting

The Cisco WAP371 device can be wall or ceiling-mounted. A mounting kit is

packaged with your device. The kit is designed to install your device to the wall or the

ceiling.

The mounting bracket has some flexibility so that you can reuse existing holes drilled

for a Cisco WAP551 or WAP561 device. The installer can remove the Cisco WAP551

or WAP561 and mount the Cisco WAP371.

The dimensions for the mount kit screws are as follows:

1 .31 to .33 in (7.8

to 8.3 mm)

Insecure mounting might damage the device or cause injury. Cisco is not

ARNING

responsible for damages incurred by insecure wall or ceiling mounting.

2 .86 to .88 in (21.8

to 22.3 mm)

Cisco Small Business WAP371 Series Wireless Access Point

3 .22 to .24 in (5.5

to 6.0 mm)

4 .69 to .72 in (17.5

to 18.2 mm)