Epson CX6400 - Stylus Color Inkjet Ürün Destek Bülteni - Sayfa 3

Hepsi Bir Arada Yazıcı Epson CX6400 - Stylus Color Inkjet için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson CX6400 - Stylus Color Inkjet 6 sayfaları. Product support bulletin(s)
Ayrıca Epson CX6400 - Stylus Color Inkjet için: Teknik Özellikler (2 sayfalar), Bilgi Kılavuzu (4 sayfalar), Ürün Bilgi Formu (4 sayfalar), Ürün Bilgileri (14 sayfalar), Buradan Başlayın Kılavuzu (8 sayfalar), Buradan Başlayın Kılavuzu (9 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güncelleme (1 sayfalar), Ürün Destek Bülteni (1 sayfalar)

Updating the firmware:

1.) Configure the Mac and the print server for TCP/IP.

2.) Download/copy the "WLEP399.bin" firmware file from the epson10651.sea.hqx to

the Apple Desktop.

3.) Navigate to Macintosh HD>Applications>Utilities>Terminal

4.) At the terminal screen do the following:

1. Type cd desktop then press the RETURN key

2. Type tftp <ipaddress* of the print server> then press the RETURN key

3. At the tftp> prompt, type binary then press the RETURN key

4. At the tftp> prompt, type put <WLEP399.bin**> then press the RETURN key

*Where ipaddress is the IP address of the Wireless print server.

135.79.2.468 or 10.0.1.3

**Where WLEP399.bin is the filename of the 3.99 firmware update.

5. You will get a message on the screen, at the TFTP> prompt, that a number of bytes

were sent. This means the update is complete.

5.) Next, go to the print server and perform a reset, then launch WP-Admin again to setup the

print server. At WP-Admin in the search screen, click on CLEAR, then click on START for

the print server to reappear. Finish the print server configuration, then Quit WP-ADMIN.

Search for the printer:

Once the update is complete, open the Print Center.

Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus

Photo 2200 printer.

Page 2 of 2

Examples