Epson CX7800 - Stylus Color Inkjet Manuel - Sayfa 17
Hepsi Bir Arada Yazıcı Epson CX7800 - Stylus Color Inkjet için çevrimiçi göz atın veya pdf Manuel indirin. Epson CX7800 - Stylus Color Inkjet 19 sayfaları. Epson scan icm updater v1.20 (psb.2008.07.001)
Ayrıca Epson CX7800 - Stylus Color Inkjet için: Teknik Özellikler (2 sayfalar), Teknik Özet (6 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar), Buradan Başlayın Kılavuzu (8 sayfalar), Güncelleme (1 sayfalar)
Sayfayı Yazdır
4. Follow the instructions on the screen to print a vertical
alignment sheet. You see a window like this one:
5. Look at the four sets of patterns in your printout. For each
set, if you see a pattern with no visible vertical lines, enter its
number in the corresponding box on the screen and click
.
Next
If you can't find an aligned pattern, choose the one that
looks the best. Click
Realignment
another alignment sheet and repeat this step.
6. Click
to print a black horizontal alignment sheet.
Print
After it's printed, you see a window like this one:
7. Look at the printout and select the pattern with no gap or
line between the rectangles. Enter the number for that
pattern in the box on the screen and click
If you can't find an aligned pattern, choose the one that
looks the best. Then click
print another alignment sheet and repeat this step.
and then
to print
Print
.
Next
and then
Realignment
Print
8. Click
to print a color horizontal alignment sheet.
Print
After it's printed, you see a window like this one:
9. Look at the printout and find the pattern with no gap or
line between the rectangles and enter its number in the box
on the screen.
If you can't find an aligned pattern, choose the one that
looks the best. Then click
print another alignment sheet and repeat this step.
10. Click
Finish
Cleaning the Printer
To keep your Epson Stylus CX7800 working at its best, you
should clean it several times a year.
1. Turn off the Epson Stylus CX7800, unplug the power cord,
and disconnect the USB cable.
2. Remove all the paper, then use a soft brush to clean the
sheet feeder.
3. If the glass surface of the document table is dirty, clean it
with a soft, dry, lint-free cloth, or use a small amount of
glass cleaner on a soft cloth to clean it. Do not spray glass
cleaner directly on the glass.
4. If the outer case or inside of the sheet feeder is dirty, clean it
with a soft cloth dampened with mild detergent. Keep the
scanner section closed to prevent water from getting inside.
to
8/05
Epson Stylus CX7800
Realignment
to close the Print Head Alignment Utility.
Epson Stylus CX7800
and then
to
Print
17
-