CABINETS TO GO Findley & Myers SBA33 Montaj Talimatları - Sayfa 3
İç Mekan Mobilyaları CABINETS TO GO Findley & Myers SBA33 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. CABINETS TO GO Findley & Myers SBA33 4 sayfaları. Apron front sink base cabinet
Sayfayı Yazdır
Instructions:
►
1.
Place the face frame (A) face down on a flat soft working surface to ensure that the face is
not scratched or damaged (Figure 1).
2.
Installing the Side Panels (Figure 2): Insert right and left side pa nels (B) into the grooves of
the face frame (A) and align the cam lock connectors (Figure 2). Lock the cam
with a screw driver by turning the screw 180° clockwise (Figure 4).
3.
Installing the Bottom (Figure 3): Gently spread the side panels and insert the bottom (C)
into the grooves of side panels (B) until it is seated in the face frame (A). Align it and lock each cam.
4.
Installing the Back Braces and Toe Kick (Figure 5): Place the bottom back brace (D) and top
back brace (E) at rear of side panels (B.) Align and lock each cam lock. Install the Toe Kick (F) by
locking the cam lock at both ends (Figure 5).
A
Figure 1
B
B
Figure 2
C
B
B
Figure 3
E
B
D
B
C
F
Figure 5
Page 3
Figure 4