Cisco 500 Series Manuel - Sayfa 7

Konferans Sistemi Cisco 500 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco 500 Series 24 sayfaları. Stackable managed switches
Ayrıca Cisco 500 Series için: Güvenlik Bilgileri Kılavuzu (42 sayfalar), Manuel (4 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (21 sayfalar), Veri Sayfası (5 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (46 sayfalar), Manuel (40 sayfalar), Yönetim Kılavuzu (48 sayfalar), Sorun Giderme ve Bakım (15 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar), Hızlı Başlangıç Kılavuzu (25 sayfalar)

Accessories

The following table describes the Cisco Headset 561 and 562 Headset buttons.

Table 2: Cisco Headset 561 and 562 Headset Buttons

Number

Name

Power and Call button

Mute button

Volume button

LED

Cisco Headset 561 and 562 Buttons and LED

Description

Use to power the headset on and off.

Press and hold for 4 seconds to power on and off the headset.

Incoming and active call management depends upon if you have

one call or multiple calls.

One call:

• Press once to answer incoming calls.

• Press once to put an active call on hold. Press again to

retrieve a call from hold.

• Press twice to reject an incoming call.

• Press and hold to end an active call.

Multiple calls:

• Press once to put an active call on hold, and to answer a

second incoming call.

• Press once to put a current call on hold. Press again to resume

a call, or press and hold for 2 seconds to end the current call

and to resume a held call.

• Press and hold to end an active call, and to answer another

incoming call.

• Press twice to stay on a current call, and to reject a second

incoming call.

Toggle the microphone on and off. The Mute

lights when Mute on the headset is enabled.

Adjust the volume on your headset.

Shows the headset status:

• Blinking red—Incoming call.

• Steady red—Active call.

• Blinking white—Firmware upgrade is in progress.

on the phone

Accessories