Cisco 500 Series Hızlı Başlangıç Kılavuzu - Sayfa 5

Konferans Sistemi Cisco 500 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco 500 Series 25 sayfaları. Stackable managed switches
Ayrıca Cisco 500 Series için: Güvenlik Bilgileri Kılavuzu (42 sayfalar), Manuel (4 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (21 sayfalar), Veri Sayfası (5 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (46 sayfalar), Manuel (40 sayfalar), Yönetim Kılavuzu (48 sayfalar), Manuel (24 sayfalar), Sorun Giderme ve Bakım (15 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar)

For stability, load the rack from the bottom to the top, with the

AUTION

heaviest devices on the bottom. A top-heavy rack is likely to

be unstable and might tip over.

Connecting Network Devices

To connect the switch to the network:

Connect an Ethernet cable to an Ethernet port of a computer, printer,

TEP

network storage, or other network device.

Connect the other end of the network Ethernet cable to one of the

TEP

numbered switch Ethernet ports.

The Ethernet port light turns green when the connection is active.

Refer to

Managed Switch

each switch.

Repeat

TEP

the switch.

Cisco strongly recommends using Cat5 or better cable for Gigabit

OTE

connectivity. When you connect your network devices, do not exceed

the maximum cabling distance of 100 meters (328 feet). It can take up to

one minute for attached devices or the LAN to be operational after it is

connected. This is normal behavior.

500 Series switches have both standard Ethernet and stack ports.

OTE

Standard ethernet ports can not be used for stacking. Refer to

the Switches

for additional details.

500 Series Stackable Managed Switches

External Features of the Cisco 500 Series Stackable

for details about the different ports and LEDs on

Step 1

and

Step 2

for each device you want to connect to

Stacking