Epson EMP 810 Hızlı Referans Kılavuzu - Sayfa 5

Hepsi Bir Arada Yazıcı Epson EMP 810 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Epson EMP 810 17 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EMP 810 için: Ağ Kurulum Kılavuzu (37 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Teknik Özellikler (1 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Sayfayı Yazdır

Tip

If a laptop computer or a computer with a

LCD screen has been connected to the

projector, you may need to change the

output destination for video signals

depending on the computer keys (

) or the computer's settings. The

output destination can normally be

changed by holding down the computer's

key and pressing one of the

Function keys.

Once the source has been changed, after

a short wait the projector will start

projecting. If the output has been

changed to external output, only the

external output should be used.

For details, refer to the documentation

provided with your computer.

Examples of changing output

NEC

Panasonic

TOSHIBA

IBM

SONY

FUJITSU

Macintosh

After restarting the computer,

change the Control Panel

monitor and sound settings

so that Mirroring is active.

If images do not appear ...

Change the input

signal.

If you have other problems ...

Refer to the online

Help information.

Press

, and

then follow the

instructions.

Projecting

Projector

Remote Control

* Refer to Troubleshooting.