Epson Epson M2170 Buradan başlayın - Sayfa 2

Hepsi Bir Arada Yazıcı Epson Epson M2170 için çevrimiçi göz atın veya pdf Buradan başlayın indirin. Epson Epson M2170 4 sayfaları.

Epson Epson M2170 Buradan başlayın
5
When the ink bottle is empty, remove the bottle and
securely close it with the cap.
Note:
Do not leave the ink bottle inserted; otherwise the bottle
may be damaged or ink may leak.
6
Securely close the ink tank cap.
7
Close the ink tank cover.
8
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
9
Press the
power button to turn on the product, then
wait for the
power light to stop flashing.
Note:
If an error code appears, turn off the product and check
that no protective material has been left inside the product.
10
Press
or
to select your language on the LCD screen,
then press the OK button.
Note:
You can change this setting later using the product's
control panel. For more information, see the online User's Guide.
11
When the message to see the Start Here sheet appears
on the LCD screen, press and hold the
5 seconds.
12
When the ink confirmation message appears on the LCD
screen, press the
start button to start charging the ink.
Ink charging takes approximately 10 minutes. A message
appears when ink charging is complete. Press the OK
button to continue.
Caution:
Do not turn off the product, raise the printer cover, or
load paper while the product is charging or you'll waste ink.
Note:
After some ink is used for charging, the rest is available
for printing.
13
Follow the on-screen instructions to adjust the print
quality. Press the OK button to continue.
Note:
• You need to load paper before you can adjust the print quality.
See "Load paper" below for details.
• Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User's Guide.
3

Load paper

See the online User's Guide for information about loading
capacity, available paper types and sizes, loading envelopes,
and using the rear feed slot.
1
Make sure the product is done charging the ink. Open the
paper cassette cover and pull out the paper cassette until
it stops.
2
Slide the edge guides all the way out.
help button for