Epson ET-5800 Series Buradan başlayın

Hepsi Bir Arada Yazıcı Epson ET-5800 Series için çevrimiçi göz atın veya pdf Buradan başlayın indirin. Epson ET-5800 Series 4 sayfaları.

Sayfayı Yazdır

ET-5800/ET-5850/ET-5880

Start Here

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User's

Guide.

Important Safety Instructions:

should always follow basic safety precautions to reduce the risk of fire,

electric shock, and personal injury, including the following:

• Do not use the Epson

product near water.

• Always keep this guide handy.

• Avoid using a telephone during an electrical storm. There may be a

remote risk of electric shock from lightning.

• Do not use a telephone to report a gas leak in the vicinity of the leak.

Caution:

To reduce the risk of fire, use only a No. 26 AWG or larger

telecommunication line cord.

The illustrations show the ET-5800, but the steps are the same for

all models, unless otherwise specified.

Unpack

Note:

Do not open the ink bottles until you are ready to fill the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

Remove all protective materials from the product.

When using telephone equipment, you

Lift up the scanner unit. Remove all protective materials

from inside the product.

Caution:

The printer ships with the transportation lock in the

printing position. Do not move it from the printing position.

Lower the scanner unit.

Fill ink tanks

Warning:

Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution:

This product requires careful handling of ink. If ink spills,

wipe it off immediately with a damp towel to avoid permanent stains.

If ink gets on your clothes or belongings, it may not come off.

Note:

• Epson cannot guarantee the quality or reliability of third-party ink.

• Use the ink bottles included with the printer to set up the product.

• The included ink bottles are designed for reliable printer setup and

cannot be resold.

Epson recommends the use of Genuine Epson T542 pigment

inks. The use of any other inks may cause damage not covered

by the warranty, particularly if they are not pigment. Epson

cannot guarantee that non-Epson T542 inks are pigment, even

if labeled as compatible.

Open the ink tank cover, then open the cap for the

black ink tank.

Note:

Refer to the color-coded sticker on the ink tank unit to

identify the color of each tank.

Unpack the black (BK) ink bottle. Hold the ink bottle

upright and slowly turn the bottle cap to remove it.

Caution:

Do not shake or squeeze the ink bottles. Do not touch

the top of the ink bottle after its cap is removed.