Cisco EX60 Kullanıcı Kılavuzu - Sayfa 20

Konferans Sistemi Cisco EX60 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco EX60 34 sayfaları. Telepresence system
Ayrıca Cisco EX60 için: Kullanıcı Kılavuzu (50 sayfalar), Kullanıcı Kılavuzu (46 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (42 sayfalar), Kullanıcı Kılavuzu (41 sayfalar), Kurulum Kılavuzu (6 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (7 sayfalar), Sorun Giderme Kılavuzu (37 sayfalar), Kullanıcı Kılavuzu (34 sayfalar), Başlangıç Kılavuzu (46 sayfalar)

Cisco EX60 Kullanıcı Kılavuzu
Cisco Telepresence System EX60
Contents
Introduction

Setting the EX60 in standby

Outside a call, you may have the unit enter standby mode by touching the Power
button on the main unit (the screen). The Standby dialog is displayed and the unit
enters standby immediately. This does not work when you are in a call.
Tap the touch
pad to wake up the
system from standby.
Shutting down the EX60
Outside a call, press the Power button until the Shutdown progress bar is filled
completely.
Release the button and the unit will go in shutdown in just a few seconds.
D14779.01
User guide EX60, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Connecting EX60
Using EX60
To start the system again,
press the Power button
until the LED illuminates
(green light).
20
The settings
The settings
Reverting to factory default settings
To revert to the factory default settings, do as follows:
1.
Disconnect the power cord.
2.
Reconnect the power cord—a green light will illuminate shortly after.
3.
Press the Power button as soon as the green light appears. Keep it depressed
for 15 seconds or so, until the green light starts flashing.
4.
Release the button and press twice within 2 seconds. All settings will now revert
to factory default settings.
Changing background image on touch screen
The background image on the touch screen controller can be changed.
Do as follows:
1.
Draw a circle with your finger anywhere on the screen where there are no icons.
2.
The below image will then appear on the touch screen screen. Tap one of the
small images to use it as background image.
User guide
Web interface
Contact us
www.cisco.com