Cisco EX90 Kullanıcı Kılavuzu - Sayfa 23

Konferans Sistemi Cisco EX90 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco EX90 49 sayfaları. Telepresence system
Ayrıca Cisco EX90 için: Kullanıcı Kılavuzu (50 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (37 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (42 sayfalar), Kullanıcı Kılavuzu (45 sayfalar), Kurulum Kılavuzu (6 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (7 sayfalar), Sorun Giderme Kılavuzu (37 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (45 sayfalar), Kullanıcı Kılavuzu (37 sayfalar), Başlangıç Kılavuzu (46 sayfalar)

Sayfayı Yazdır
Cisco EX90 Kullanıcı Kılavuzu
Cisco TelePresence System EX90
Contents
Introduction

Do not disturb

When set to Do Not Disturb (DND), ringtones are muted
and missed calls you get while having DND active, will be
presented when you exit DND..
You may, however, place calls as much as you like. To
activate this feature, press the icon in the upper left corner.
Press again to deactivate.
You may also hide the Do Not Disturb poster by tapping
Hide.
Using Touch Tones (DTMF)
Sometimes you may be urged to enter touch tones
(DTMF) during a call, typically to reach extensions or to
provide a pin code.
In a call,
tap touch tones
Use the
touch tone keypad.
Tap anywhere
outside it to exit.
D14724.09
User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90
Using the EX90
Using the EX90
Far end camera control
If the other end
point permits
it, you may
control their
camera. This is
known as Far
end camera
control.
If the other
camera cannot
be controlled,
nothing
happens.
This works in
Point-to-point
calls as well as
MultiSite calls.
Calling the Help Desk
Your videosystem may have been configured with the ability to call for help (Help Desk).
If present, tap the blue icon as outlined.
Scheduled meetings
Tap the name, whose camera
shall be controlled, along the
bottom line
(
)
and then tap
Camera Control (
).
23
User guide
The settings
Contact us
Adjust zoom and pan as
required
(
). Tap Back to exit
the menu
(
).
Tap as outlined to call the Help Desk.
www.cisco.com