Cable Electronics HSW44C Plus Kullanım Kılavuzu - Sayfa 4

Matris Anahtarlayıcı Cable Electronics HSW44C Plus için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cable Electronics HSW44C Plus 17 sayfaları. 4x4 hdmi matrix switch with cat5 output and up to 60khz ir

Sayfayı Yazdır
Mechanical
Matrix
Enclosure
Model
440 x 142 x 44mm[17.3 " x 5.6 " x 1.7"] 90x 85x 25mm [3.5" x 3.3" x 1"]
Dimensions
Package
(L x W x H)
Carton
Model
4.1 lbs
Weight
Package
1U rack-mount with ears Wall
Fixedness
hanging holes
Power supply
5V 6A DC
Power consumption
20 Watts [max]
Operation temperature
Storage temperature
Relative humidity
1x Matrix
2
1x IR blaster
Package Contents
2x Rack-mounting ear
1x IR remote control
1x User Manual
1
The HSMR Plus has been tested extensively and found that it doesn't require
external power supply. If in rare situation you find it cannot work with the
HSW44C Plus, please use any +5V power adapter to plug in the power jack
and see if it can work. If not, please contact your technical support for
further service.
2
Additional IR remote controllers and IR blasters can be purchased as
optional accessories to control the HDMI sources located separately.
3
Ethernet or RS-232 control must be connected either one at a time.
Connecting both types of cables may cause command confusion.
HSMR
Metal enclosure
533 x 230 x 114 mm [21" x 9" x 4.5"]
580 x 570 x 260mm [23" x 23" x 10.2"]
180g[6.3 oz]
8.6 lbs
Wall-mount with screws
Not necessarily required
1 Watt [max]
(provided by MATRIX)
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
4x HSMR
4x IR receiver
8x Wall-mounting screws
2
1x 5V 6A in-line power adapter
1x C5-type power cord
5
HSW44C Plus
1
1.
Seven Segment LED Indicators: Control display
2. Front panel push buttons: Used to select input source and display channel number
3.
IR Sensor: IR sensor for receiving the IR commands from the IR remote
IR Receiver: Plug in IR receiver
4.
10
6
9
5
11
5.
+5V DC: 5V DC power jack
6.
RS-232: RS-232 control port
7. SW1-SW4: DIP switch [see DIP Switch section in p.8]
8.
IN 1 – IN 4: HDMI inputs
9.
Ethernet: For IP control
On/Off Switch
10.
11.
SW Main: 4-pin DIP switch (Operation Mode See Pg. 9)
IR 1 – IR 4: IR extender jacks for individual HDMI source control
12.
13.
OUT 1 – OUT 4: RJ-45 TMDS/DDC outputs for each output channel
14.
IR MAIN: IR extender jack for all HDMI source control [default socket for IR blaster]
3
1
2
12
7
8
6
4
13
14